OpenComm will pair with most Bluetooth devices that use Bluetooth^Ⓡ 3.1 or higher, including phones, tablets, computers and watches. It will not pair with gaming consoles. It will not pair with some transmitters.

OpenComm can be paired with a Smart TV using Bluetooth^Ⓡ v3.1 and up. If your TV does not have Bluetooth, you'll need a Bluetooth transmitter.

1.Start with your OpenComm powered off

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds. Your OpenComm will turn on (continue holding the button) and then the LED light will flash red and blue. Audrey will say "pairing" indicating pairing mode.

3. Open your device's Bluetooth settings and select "OpenComm by Shokz". Audrey will say "connected."

OpenComm offers multipoint pairing, which allows users to connect to two devices at the same time. While you won’t receive audio from both devices at the same time, you’ll be able to seamlessly transition from one device to the other.

To pair multiple devices through multipoint pairing:

1.Start with your OpenComm off.

2.Press and hold volume+ until Audrey says “pairing” and the LED indicator flashes red and blue.

3.Press and hold the multifunction button and volume+ button for 3 seconds.Audrey says "multipoint enabled."

4.Open your first device's Bluetooth^® menu and select "OpenComm by Shokz."Audrey says "connected"

5.Turn your OpenComm off.

6.Re-enter pairing mode by pressing and holding the volume+ button until Audrey says “pairing”and the LED indicator flashes red and blue.

7.Open your second device's Bluetooth^® menu and select "OpenComm by Shokz."Audrey says "connected."

8.Turn your OpenComm off.

9.Turn your OpenComm on. Your OpenComm are now connected to both devices.

You can disable multiple pairing by pressing and holding the volume- button, and multifunction button under pairing mode. Audrey says"Multiple disabled"

When paired through the multipoint pairing process, OpenComm will connect to whichever device is in range. If both devices are in range, it will connect to whichever device you were more recently using. You can switch devices through some notifications such as a phone call, or simply by using the opposite device. Multipoint pairing may not work with all devices or transmitters.

You can change the devices to which your OpenComm is paired by resetting the headphones, and then pairing the new devices. To reset OpenComm:

1. Start with your OpenComm off.

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds until Audrey says “pairing” and the LED indicator flashes red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.

4. Turn your OpenComm off. OpenComm is now reset and can be re-paired with new devices.

After resetting, the headphones will clear all connected devices before. The headphones needs pair with new devices under pairing mode.

Press and hold the volume+ for 3-5 seconds. Audrey says “Welcome to Shokz.” Continue holding the volume+ button for an additional 2-3 seconds. Audrey will say “Pairing” and the LED light will flash red and blue, indicating pairing mode.

Click the volume+ or volume- button while music is paused. Audrey says “Battery High,” “Battery Medium,” “Battery Low,” or “Charge Me.” Please note this feature may not work on all devices.

Click the multifunction button once while music is playing. You’ll hear one beep. The music will pause. Click the multifunction button once while music is paused. You’ll hear one beep. The music will play.

For the playing volume, click the volume+ or volume- buttons to turn up or turn down volume levels while music is playing.

For the beep volume, it is the default volume set in the factory and can't be adjusted.

Double-click the multifunction button while music is playing. You’ll hear one beep. The next track will play.

Three-click the multifunction button while music is playing. You’ll hear one beep. The previous track will play.

Double-click the multifunction button while it is idle. Audrey says “Last Number Redial.”

Press and hold the multifunction button for two seconds, prompting your phone’s intelligent personal assistant. The function depends on the connected device and application.

OpenComm has 2 EQ settings in total to allow you to customize your music experience.

One is the Standard mode for daily listening to music

1) Volume Up Mode: recommended to use when volume is set at 70% of the maximum volume and higher. Reducing vibration for better experience.

2) Volume Standard Mode: recommended to use when volume is lower than 70% of the maximum volume.

The other one is Vocal booster mode which is to restore the details of human voice.

You can press and hold the volume+ and volume- buttons simultaneously for two seconds while music is playing. Audrey says “EQ changed.”

OpenComm can support 4 languages, including Chinese, Japanese, English and Korean. You can follow the steps to change language.

1. Turn off your OpenComm first;

2.Press the volume + button for 5-7 seconds until the headphone enter the pairing model ( LED light will flash red & blue);

3.Double click the multifunction button and you hear a beep;

4. Volume + or Volume - button to check the language.

1. Start with your OpenComm off.

2. Enter pairing mode by pressing and holding the volume+ button for 5-7 seconds. Your headphones will turn on, and then the LED light will flash red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds. You'll hear beeps and/or feel vibrations.

4. Turn your headphones off.

You can put the boom microphone next to your mouth when you would like to use the microphone.

The boom microphone on the OpenComms is not detachable, you are able to move the microphone so you can move it away from your mouth when you are done with your call.

(For Windows system)

After the successful connection to a laptop. There are 2 channels for you to choose from.

Channel 1: Headphones (OpenComm by Shokz Hands-Free AG Audio)

This channel is used to manage voice calls, etc.

Channel 2: Headphones (2-OpenComm by Shokz Stereo)

This channel is used to manage the music channel, for listening to music, watching video and other audio output

You can change the Channel via the bottom volume icon.



(For OS system)

After the successful connection to an OS laptop, it will automatically change Channel for you under actual situation.

To mute the microphone, press and hold the volume+ and volume- buttons simultaneously for two seconds while on a call. Audrey will say “Mute on.”

To unmute the microphone, press and hold the volume+ and volume- buttons simultaneously for two seconds while on a call with the mic muted. Audrey will say “Mute off.”

Click the multifunction button once while a call is coming in. You’ll hear one beep and the call will be answered. If you want to end a call, click the multifunction button once while on a call. You’ll hear one beep and the call will end.

Press and hold the multifunction button for two seconds as a call is coming in. You’ll hear two beeps and the call will be rejected.

Press and hold the multifunction button for two seconds as a call is coming in. You’ll hear one beep and the current call will be ended.

Test the headphones with an alternate magnetic charging cable. If the headphones continue to not charge, file a warranty claim here within 2-year warranty period.

We suggest that you can charge OpenComm and put them on a dry place for a few days. If the LED light is still on, you can file a warranty claim here within 2-year warranty period.

We suggest that you charge the OpenComm to check if the OpenComm is out of the battery first, and confirm that you are pressing and holding the volume+ button, which acts as the power button on OpenComm, for 3-5 seconds. Audrey will say “Welcome to Shokz.”

If you continue to be unable to power on your headphones, Please file a warranty claim here.

Most connectivity problems are resolved with the following step, you can try to do that by the following instructions:

1. Clear all paired Bluetooth lists in the connected devices

2. Restart the connected devices

3. Reset OpenComm

4. Charge OpenComm for a few minutes.

5. Pair your OpenComm again

If it is the first time to happen the issue, we would like to recommend you to keep it for a while to check whether the issue happens in the future.

If the issue happens frequently on your OpenComm, you can file a warranty claim here within 2-year warranty period.

Most connectivity problems may resolve with the following step, you can try to do that by the following instructions:

1. Clear all paired Bluetooth lists in the connected devices

2. Restart the connected devices

3. Reset OpenComm

4. Charge OpenComm for a few minutes.

5. Pair your OpenComm again

Most connectivity problems are resolved with the following step, you can try to do that by the following instructions:

1. Clear all paired Bluetooth lists in the connected devices

2. Restart the connected devices

3. Reset OpenComm

4. Charge OpenComm for a few minutes.

5. Pair your OpenComm again

If using a phone, please check your accessibility settings to ensure the volume is equally balanced between both left and right sides.

After checking the phone’s accessibility settings, we suggest that you try to reset your OpenComm.

1. Start with your OpenComm off.

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds until Audrey says “pairing” and the LED indicator flashes red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button (all three buttons) simultaneously for 3-5 seconds, until you hear two beeps or feel vibrations.

4. Turn your OpenComm off. OpenComm is now reset and can be re-paired with your device

If the above step can't be helpful to you, you can file a warranty claim here within 2-year warranty period.

Please confirm that the volume is turned up on both your device and on OpenComm. If both are turned up, please reset OpenComm by following instructions:

1. Start with your OpenComm off.

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds.Your OpenComm will turn on, and then the LED light will flash red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds. You'll hear beeps and/or feel vibrations.

4. Turn your OpenComm off.

Your OpenComm is now reset and can be re-paired with your device.

If the reset does not resolve the issue, you can file a warranty claim here within 2-year warranty period.

First of all, you are able to adjust the volume while the headphone is playing music.

(For Windows system)

After the successful connection to a laptop. There are 2 channels for you to choose from.

Channel 1: Headphones (OpenComm by Shokz Hands-Free AG Audio)

This channel is used to manage voice calls, etc.

Channel 2: Headphones (2-OpenComm by Shokz Stereo)

This channel is used to manage the music channel, for listening to music, watching video and other audio output

The volume only can be changed under Channel 2, kindly change the Channel via the bottom volume icon.



(For IOS system)

After the successful connection to an OS laptop, it will automatically change Channel for you under actual situation.

A manual reset may help resolve some sound quality issues. To reset your OpenComm:

1. Start with your OpenComm off.

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds.Your OpenComm will turn on, and then the LED light will flash red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds. You'll hear beeps and/or feel vibrations.

4. Turn your OpenComm off.

Your OpenComm are now reset and can be re-paired with your device.

If the issues of the microphone continue, kindly contact us or email at customer.service@shokz.com.

A manual reset can help resolve some sound quality issues. To manually reset your OpenComm:

1. Start with your OpenComm off.

2. Enter pairing mode by pressing and holding volume+ for 5-7 seconds.Your OpenComm will turn on, and then the LED light will flash red and blue.

3. Press and hold the multifunction button, volume+ button and volume- button simultaneously for 3-5 seconds. You'll hear beeps and/or feel vibrations.

4. Turn your OpenComm off.

Your OpenComm is now reset and can be re-paired with your device.

If the issues of the microphone continue, kindly contact us or email at customer.service@shokz.com.

If your OpenComm is snapped on the headband, you can file a warranty claim here within 2-year warranty period.

If your OpenComm falls off a button, you can file a warranty claim here within 2-year warranty period.

If your OpenComm is peeled from speaker., you can file a warranty claim here within 2-year warranty period.

The battery will be affected by the usage time. The last time is based on many factors, including battery, volume, environment and so on. More details kindly contact us or email at customer.service@shokz.com.

We recommend that you clean your OpenComm on a regular basis by rubbing it down with a clean, dry cloth.

When not in use, we suggest you store your OpenComm in a safe, dry place within a portable pouch, semi-hard zipper case, or hard case.

IP55 water-resistant means the products are anti-spray（3.63mm） from water for 1~3 minutes. When you wear the headphones in the continually rain the water might enter it through actual hole. Therefore, kindly use the headphone in a dry, clean place.

The main differences are the function. The hearing aids work by amplifying sound to make the users get the amplified sound while our headphones are featured with the bone conduction technology which the sound is transmitted by the bone instead of amplifying the sound. Moreover, our headphones need to connect a playing device but hearing aid can work alone.

As the situation varies person from person, we are unable to confirm that whether our headphones will work for any particular individual. We suggest you can ask the doctor first, or there are plenty of retailers with in-store demos, we encourage you to give them a try. Kindly see the retailers here

It depends on the type of hearing aids, the headphones are ear-hook style and suitable to wear at the same time with hearing aids if there is space at ear. With Bluetooth, the headphones need to be paired to a device to play the music via Bluetooth. We would suggest you can contact the support team of the hearing aids to confirm the function. Moreover, there are plenty of retailers with in-store demos, we encourage you to give them a try. Kindly see the retailers here

We do offer a 2-year warranty for all our customers that bought headphones from the authorized agents, against manufacturing defects for all of its authentic products from the date of purchase. If you experience a manufacturer defect at any point in the first two years, kindly apply for a warranty claim. More detail about warranty claim reference here

The orders placed on uk.shokz.com enjoy a 30-day return window. If you're not satisfied with your purchase for any reason, simply return it within the 30-day trial period from the purchase date for a refund. More detail about order reference here